MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 29 of 207
MWO 5--2350--262--35--4
2--10
SECTION IV INSTALLATION OF UMBILICAL CABLE DISCONNECT
BRACKET -- CONTINUED
NOTE
Step g below applies to Figure 2--7.
g.
Mount HDC umbilical cable disconnect bracket (1) on vehicle forward left bulkhead (vehicle sponson) (4)
using two locking screws, B1821BH025C075L, (2) and two flat washers, MS27183--50, (3), as shown in
Figure 2--7. Do not tighten two locking screws (2) at this time.
Figure 2--7. Umbilical Cable Disconnect Bracket Installation
h.
Do not reinstall switch panel (Driver’s Instrument Panel) at this time.
i.
Do not reinstall driver’s seat at this time.
Back to Top
