MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 22 of 207
MWO 5--2350--262--35--4
2--3
SECTION II INSTALLATION OF HDC CONTROL BOX STOWAGE FIXTURE
NOTE
Steps a through c below apply to Figures in TM 5--2350--262--20--1 and TM 5--2350--262--20--2.
a.
Remove mounting screw at center of parking brake lever and mounting screw from lower portion of
parking brake lever attached to mounting bracket per TM 5--2350--262--20--1.
b.
Move parking brake lever slightly to access self--locking screws holding driver’s seat assembly in place.
c.
Remove driver’s seat per TM 5--2350--262--20--2. Discard four self--locking screws.
d.
Access area behind driver’s seat location.
WARNING
Serious hearing loss and eye injury can occur during drilling and grinding operations.
Wear ear and eye protection.
NOTE
Apply tape over area where holes will be drilled to make it easier to mark locations and
drill holes.
Back to Top
