MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 25 of 207
MWO 5--2350--262--35--4
2--6
SECTION II INSTALLATION OF HDC CONTROL BOX STOWAGE FIXTURE --
CONTINUED
NOTE
Steps p through r below apply to Figure 2--3.
p.
Install self--sticking “HDC Control Box” marker, 12496928--4, (1) on rear wall above stowage location as
shown in Figure 2--3.
q.
Place HDC Control Box, 12496937, (2) in stowage fixture with front of Control Box facing rearward
(towards rear wall) and electrical connectors at top as shown in Figure 2--3.
r.
Hand--tighten wing nuts (4) against retainer bar (3) on threaded rods (5) to secure HDC Control Box (2) in
stowed position.
Figure 2--3. HDC Control Box Stowed
Back to Top
