MWO-9-2300-378-34-2
TANK, COMBAT FULL-TRACKED
MODIFICATION WORK ORDER
JUNE 1984
MWO-9-2300-378-34-2 - Page 22 of 92
MWO 9-2300-378-34-2
(3) Remove and discard pipe plugs from upper right and left bank exhaust pipe bosses
(figure 9). It may be necessary to apply heat to the bosses to aid in plug removal.
Figure 9. Removal of Exhaust Pipe Plugs
NOTE
While performing next two steps, a clearance
problem may exist between right tube and parking
brake cable bracket, and also between left tube and
engine
crankcase
breather
tube
clamp
(figures 10 and 11).
Carefully bend back parking
brake cabIe bracket to obtain sufficient clearance on
the right bank and reposition crankcase breather tube
clamp to obtain sufficient clearance on the left bank.
Tube adapters on exhaust pipe ends of right and left
bank tube assemblies 12275807 and 12275808 are
preset and are integral parts of the tubes.
20
Back to Top
