SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 323 of 671

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Battery ground cable disconnected (para. 4-68).

a. Removal

b. Installation

NOTE

Perform steps 1 and 2 for blackout light lamp installation.

Perform steps 3 and 4 for dome light lamp installation.

1.

Install lamp (4) in light body (2).

2.

Install blackout light cover and lens assembly (3) on light body (2) with four screws (5).

3.

Install lamp (8) in light body (1).

4.

Install dome light cover and lens assembly (6) on light body (1) with two screws (7).

SMI 9-2320-387-14&P-1

Change 4

12-175

FOLLOW-ON TASKS: • Connect battery ground cable (para. 4-68).

• Check blackout light and dome light for proper operation (TM 9-2320-387-10).

NOTE

Perform steps 1 and 2 for blackout light lamp removal. Perform

steps 3 and 4 for dome light lamp removal.

1.

Remove four screws (5) and blackout light cover and lens assembly (3) from light body (2).

2.

Remove lamp (4) from light body (2).

3.

Remove two screws (7) and dome light cover and lens assembly (6) from light body (1).

4.

Remove lamp (8) from light body (1).

12-114. TROOP/CARGO WINTERIZATION BLACKOUT/DOME LIGHT LAMP

REPLACEMENT