SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 315 of 671

This task covers:

a. Removal

b. Installation

Materials/Parts

Eighteen locknuts (Appendix G, Item 101.9)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

a. Removal

b. Installation

Remove eighteen locknuts (2), blackout curtain (3), and retainer (1) from arctic curtain (4). Discard

locknuts (2).

Install blackout curtain (3) and retainer (1) on arctic curtain (4)

with eighteen locknuts (2).

SMI 9-2320-387-14&P-1

Change 4

12-167

NOTE

There are two blackout curtains located in the driver’s

compartment. There is also a blackout curtain located above the

driver’s compartment on the troop/cargo enclosure assembly. This

blackout curtain opens from inside the enclosure assembly. The

replacement procedures for all blackout curtains are basically the

same. The following replacement instructions cover the right

blackout curtain in the driver’s compartment.

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

12-109. TROOP/CARGO WINTERIZATION BLACKOUT CURTAIN REPLACEMENT