TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

  TB-9-2320-279-13-1 - Page 415 of 524

TB 9-2320-279-13-1
0052-23
6.
Install hose 2521 (5) and hose 2424 (8)
on bracket (12) with double cushion
clip (13), screw (11), and locknut (10).
NOTE
Use hole drilled in Step 1 to mount
double cushion clip to fender in Step 7.
7.
Install hose 2521 (5) and hose 2424 (8)
on fender (2) with double cushion
clip (14), screw (15), washer (16), and
locknut (17).
8.
Install preformed packing (18) and
hose 2521 (5) on compressor (19).
Torque hose 2521 (5) to 15-18 ft-lbs.
(20-24 N
m).
9.
Install preformed packing (20) and high
pressure switch (21) on hose 2521 (5).
Torque high pressure switch (21)
to 7.5-10 ft-lbs. (10-14 N
m).
10.
Install preformed packing (22) and
hose 2522 (23) on compressor (19).
Torque hose 2522 (23) to 18-22 ft-lbs.
(24-30 N
m).


Back to Top