TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 127 of 460

TB 9-2320-279-13&P-2

HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED

0021 00

0021 00-5/(0021 00-6 Blank)

INSTALLATION (CONFIGURATION A)

NOTE

•

The following procedure covers both left and right headlight assemblies (Configuration A).

•

Left headlight assembly (Configuration A) is illustrated.

1.

Position headlight bracket (10) over mounting holes on lower brush guard.

2.

Install two washers (2) and bolts (1) in top of headlight bracket (10).

3.

Install three washers (8) and new locknuts (9) in bottom of headlight bracket (10).

4.

Install front composite light (12), five washers (14), bolts (13), washers (3), and new locknuts (4) in headlight bracket

(10).

5.

Install headlight (11), three washers (7) and new locknuts (6) on headlight bracket (10).

6.

Connect jumper harness connectors (5) to headlight (11) and front composite light (12).

7.

If equipped, turn battery disconnect switch to ON position (TM 9-2320-364-10).

8.

Check operation of headlights and front composite lights (TM 9-2320-364-10).

END OF WORK PACKAGE

417-132

13

14

12

11

10

9

8

7

6

1

2

3

4

5