TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005
TB-9-2320-279-13-P-2

  TB-9-2320-279-13-P-2 - Page 120 of 460

TB 9-2320-279-13&P-2
LOUVERED GRILLE REPLACEMENT - CONTINUED
0020 00
0020 00-2
REMOVAL
1.
Remove five locknuts (5), washers (4), bolts (2), and washers (3) from left end of five louvered grille panels (1). Discard
locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury to personnel.
NOTE
•
When removing louvered grille panels, work from top to bottom.
•
Remove louvered grille panels by sliding each panel toward right side of vehicle.
•
Each louvered grille panel weighs approximately 30 lb (14 kg).
2.
Remove five louvered grille panels (1) from right and left louvered grille brackets (10 and 11).
3.
Remove six locknuts (9), washers (8), bolts (6), washers (7), and two louvered grille brackets (10 and 11) from lower
brush guard. Discard locknuts.


Back to Top