TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 124 of 460

TB 9-2320-279-13&P-2

HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED

0021 00

0021 00-2

REMOVAL (CONFIGURATION A)

NOTE

•

The following procedure covers both left and right headlight assemblies (Configuration A).

•

Left headlight assembly (Configuration A) is illustrated.

1.

Tag and disconnect jumper harness connectors (5) from headlight (11) and front composite light (12).

2.

Remove three locknuts (6), washers (7), and headlight (11) from headlight bracket (10). Discard locknuts.

3.

Remove five locknuts (4), washers (3), bolts (13), washers (14), and front composite light (12) from headlight bracket

(10). Discard locknuts.

4.

Remove two bolts (1) and washers (2) from top of headlight bracket (10).

5.

Remove three locknuts (9) and washers (8) from bottom of headlight bracket (10). Discard locknuts.

6.

Remove headlight bracket (10) from lower brush guard.

417-132

13

14

12

11

10

9

8

7

6

1

2

3

4

5