TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 130 of 460

TB 9-2320-279-13&P-2

BLACKOUT DRIVE LIGHT REPLACEMENT - CONTINUED

0022 00

0022 00-2

REMOVAL

1.

Disconnect blackout drive electrical connector (4).

2.

Remove locknut (5), washer (6), bolt (3), washer (2), and blackout drive light (1) from bracket (7). Discard locknut.

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

1.

Install blackout drive light (1), washer (2), bolt (3), washer (6), and new locknut (5) on bracket (7).

2.

Connect blackout drive electrical connector (4).

3.

If equipped, turn battery disconnect switch to ON position (TM 9-2320-364-10).

4.

Check operation of blackout drive light (TM 9-2320-364-10).

END OF WORK PACKAGE

417-136

6

7

1

5

4

2

3