TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 66 of 460
TB 9-2320-279-13&P-2
DOOR HANDLE ASSEMBLY REPLACEMENT - CONTINUED
0012 00
0012 00-2
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
INSTALLATION
1.
Position interior handle spacer (5) and exterior door handle (1) on door assembly.
2.
Install four washers (3) and capscrews (2) on exterior door handle (1).
3.
Install bolt (8) on door cam (7).
4.
Install door cam (7) and interior grab handle (6). Tighten setscrew (4).
5.
Position link rod (11) on bolt (8) and install washer (10) and new locknut (9).
6.
Operate door handle to verify correct operation.
END OF WORK PACKAGE
417-030
1
2,3
4
5
9,10
11
8
7
6
Back to Top
