TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 72 of 460
Change 1
0013 01-2
TB 9-2320-279-13&P-2
DOOR LATCH AND COMBAT LOCK REPLACEMENT - MODEL B - CONTINUED
0013 01
REMOVAL
1.
Disconnect spring (7) from door (8).
2.
Remove locknut (3) and disconnect link rod (6) from
latch (2). Discard locknut.
3.
Remove three locknuts (4), washers (5), bolts (1), and
latch (2) from door (8). Discard locknuts.
4.
Remove four bolts (10), washers (11), and combat
lock (9) from door (8).
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
INSTALLATION
1.
Install combat lock (9), four washers (11), and bolts (10) on door (8).
2.
Install latch (2), three bolts (1), washers (5), and new locknuts (4) on door (8).
3.
Connect link rod (6) and install new locknut (3) on latch (2).
4.
Connect spring (7) to door (8).
5.
Verify correct operation of door assembly (WP 0004 00).
END OF WORK PACKAGE
440-051
Back to Top
