TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 74 of 460
TB 9-2320-279-13&P-2
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED
0014 00
0014 00-2
REMOVAL
1.
Open door assembly and open door ballistic glass (1).
NOTE
Door ballistic glass handle will lower into channel after bolt is removed.
2.
Remove locknut (9), washer (10), bolt (11) and washer (12). Discard locknut.
NOTE
It may be necessary to cut bracket (8) approximately 0.5 in. (1.3 cm) to allow handle to rotate.
417-138
0.5 INCH
(1.3 CM)
Back to Top
