TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005
TB-9-2320-279-13-P-2

  TB-9-2320-279-13-P-2 - Page 67 of 460

TB 9-2320-279-13&P-2
0012 01-1
Change 1
DOOR HANDLE ASSEMBLY REPLACEMENT - MODEL B
0012 01
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 13, WP 0034
00)
Materials/Parts
Rag, Wiping (Item 7, WP 0035 00)
Locknut
References
WP 0004 00
WP 0011 00
Equipment Conditions
Vehicle parked on level ground (TM 9-2320-279-
10)
Parking/Emergency Brake applied (TM 9-2320-
279-10)
Engine off (TM 9-2320-279-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-279-10)
NOTE
The following procedure is for left door handle assembly. Use same procedure for right door handle assem-
bly.
REMOVAL
1.
Remove spring (3) from cam (7).
2.
Remove locknut (8) and disconnect link rod (2) from
cam (7). Discard locknut.
3.
Remove spring pin (6), inside handle (4), cam (7), and
nut (5) from door (1).
440-050


Back to Top