TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 81 of 460
TB 9-2320-279-13&P-2
0014 01-1
Change 1
DOOR BALLISTIC GLASS REPLACEMENT - MODEL B
0014 01
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 13, WP 0034
00)
Materials/Parts
Rag, Wiping (Item 7, WP 0035 00)
Locknut (18)
Lockwasher (8)
References
WP 0004 00
References - Continued
WP 0011 00
Personnel Required
Two
Equipment Conditions
Vehicle parked on level ground (TM 9-2320-279-
10)
Parking/Emergency Brake applied (TM 9-2320-
279-10)
Engine off (TM 9-2320-279-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-279-10)
NOTE
The following procedure is for left door ballistic glass. Use same procedure for right door ballistic glass.
REMOVAL
1.
Remove nut (2), spring (3), and door window latch (1)
as an assembly from ballistic glass frame (4).
Back to Top
