TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005
TB-9-2320-279-13-P-2

  TB-9-2320-279-13-P-2 - Page 84 of 460

Change 1
0014 01-4
TB 9-2320-279-13&P-2
DOOR BALLISTIC GLASS REPLACEMENT - MODEL B - CONTINUED
0014 01
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Install bolts loosely to allow enough clearance to install ballistic glass and frame.
4.
With assistance, loosely install lower support (14), ballistic glass cover (9), four washers (13), new lockwashers (12),
and bolts (11) on door.
5.
With assistance, position ballistic glass (10) on lower support (14).
6.
With assistance, install upper support (5), four washers (8), new lockwashers (7), and bolts (6) on ballistic glass cover
(9).
7.
Tighten four bolts (11) on ballistic glass cover (9).


Back to Top