TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 44 of 162
TB 9-2320-280-35-12
5-16
8. PLGR ANTENNA – AT575-030 – QTY. 1
9. PLGR ANTENNA BRACKET – A3210768 – QTY. 1
10. SCREW – 90087A836 – QTY. 2
11. LOCKWASHER – MS45904-60 – QTY. 1
12. SCREW – MS35207-261 – QTY. 1
13. SPACER – 92510A318 – QTY. 2
14. SELF-TAPPING SCREW – 9421073 – QTY. 5
15. LOOP CLAMP – MS21333-65 – QTY. 5
8-5.
Locate, mark, and drill one 0.173-in. diameter hole (5) in windshield frame (4) using existing
hole (7) as starting point.
8-6.
Secure PLGR antenna (8) to PLGR antenna bracket (9) using screw (12), and lockwasher (11).
8-7.
Route PLGR cable (2) through PLGR antenna bracket (9) and connect to PLGR antenna (8).
8-8.
Secure PLGR antenna bracket (9) to windshield frame (4) using two screws (10) and
two spacers (13).
8-9.
Secure PLGR cable (2) to inside windshield frame (4) using five clamps (15) and five screws (14).
8-10.
Route PLGR cable (2) to vicinity of PLGR bracket.
Figure 5-21.
8
9
10
11
12
13
14
15
2
4
5
6
7
~
2.125
Back to Top
