TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 45 of 162
TB 9-2320-280-35-12
5-17
1. SCREW – MS90725-8 – QTY. 8
2. LOCKWASHER – MS35338-43 – QTY. 8
3. WASHER – MS27183-10 – QTY. 8
4. MOUNTING PLATE– A3014550-1 – QTY. 2
5. INSERT – ALS4-420-165 – QTY. 8
9. LOUDSPEAKER – A3014065-1 – QTY. 2
11. HANDSET – H-250/U – QTY. 2
12. SCREW – P/O A3014065-1 – QTY. 4
2
1
3
4
5
Figure 5-22.
Section IX. LOUDSPEAKER INSTALLATION
NOTE
Locate two inches from the B-Pillar centerline.
9-1.
Using speaker mounting plate (4) as template, locate, mark, and drill eight 0.390-in. diameter
holes (6) in B-pillar (7).
9-2.
Locate, mark, and drill two 0.156-in. diameter holes (8) in B-pillar (7).
9-3.
Install eight inserts (5) in holes (6).
9-4.
Install two speaker mounting plates (4) on B-pillar (7) using eight capscrews (1), washers (3), and
lockwashers (2).
9-5.
Install loudspeakers (9) on speaker mounting plates (4) using four screws (12).
9-6.
Install handset (11) on speaker connector (10).
12
11
10
9
C
L
7
6
8
0.5
2.375
0.625
~
~
Back to Top
