TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 43 of 162
TB 9-2320-280-35-12
5-15
Section VIII.
PLGR ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR)
8-1.
Remove plug (6) from existing hole in outside windshield frame (4). Refer to figure 5-21.
8-2.
Enlarge existing hole (1) in bottom of inside windshield frame (4) to 0.375-in. diameter.
Deburr hole (1).
8-3.
Locate, mark, and drill five 0.156-in. diameter holes (3) in windshield frame (4)
8-4.
Route PLGR cable (2) through hole (1) in bottom of windshield frame (4), out through existing
hole (6) of outside windshield frame (4).
Figure 5-20.
2
2
4
1
~
2.50
6.00
4.00
2.00
12.00
2. PLGR ANTENNA CABLE – 426-0141-050 – QTY. 1
3
Change 1
5
6
7
Back to Top
