TB-9-2320-280-35-15

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11

SEPTEMBER 2006

TB-9-2320-280-35-15 - Page 124 of 168

5-100

TB 9-2320-280-35-15

Figure 5-113.

1

2

5

1. RUBBER SHEET – 03A016D-1 – QTY. 1

2. RIVET – AB4-5A – QTY. 5

5. ALUMINUM FLAT BAR – 03A016D-2 – QTY. 1

Section XL. C4ISR POWER CABLES INSTALLATION

NOTE

• Use aluminum flat bar as template to locate and mark hole

position.

• Use No. 30 drill bit to drill holes in battery box.

40-1.

Drill five 0.129-in. to 0.133-in. diameter holes (4) in lip of battery box (3).

40-2.

Install rubber sheet (1) and aluminum flat bar (5) on battery box (3) with five rivets (2).

~

3

4