TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 115 of 168
5-91
TB 9-2320-280-35-15
37-13.
Route antenna cable (15) along existing taillight wiring harness (51) on rear cargo bed support (42)
and secure with four existing loop clamps (52), (53), (54), (55), and existing self-tapping screws (49).
37-14.
Route antenna cable (15) along existing taillight wiring harness (51) on left-side frame rail with
existing loop clamp (56), and screw (49).
37-15.
Route antenna cable (15) along existing taillight wiring harness (51) on rear cargo bed support (42)
with existing loop clamps (57) and (58), screws (49), and lockwashers (50).
37-16.
Route antenna cable (15) to antenna base (45) with existing loop clamp (46), screw (59),
lockwasher (47), and nut (48).
37-17.
Attach antenna cable (15) to antenna base (45).
37-18.
Coil excess antenna cable (15) and secure to inside of taillight closeout cover with tiedown
strap (36).
36. TIEDOWN STRAP – MS3367-1-0 – QTY. A/R
Figure 5-107.
45
46
47
48
49
50
52
51
53
54
15
55
42
56
57
50
36
59
58
49
Back to Top
