TB-9-2320-280-35-15

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11

SEPTEMBER 2006

TB-9-2320-280-35-15 - Page 114 of 168

5-90

TB 9-2320-280-35-15

Figure 5-106.

25. NUT – MS35650-302 – QTY. 1

27. LOOP CLAMP – MS21333-69 – QTY. 3

28. SCREW – MS35224-65 – QTY. 1

29. SELF-TAPPING SCREW – 9421073 – QTY. 2

36. TIEDOWN STRAP – MS3367-1-0 – QTY. A/R

14

39

40

41

42

27

27

44

25

26

27

28

30

32

31

33

34

35

36

30

37

37

30

38

43

15

~

29

37-8.

Route two antenna cables (14) and (15) along front wheelwell seam (26) and along front (44),

intermediate (43), and rear (42) cargo bed supports. Secure with two self-tapping screws (29), loop

clamps (27), screw (28), loop clamp (27), nut (25), and existing self-tapping screw (30) and loop

clamp (41).

37-9.

Route antenna cable (14) along taillight wiring harness with two existing loop clamps (39) and (38),

self-tapping screws (30), and lockwashers (37).

37-10.

Route antenna cable (14) to antenna base (40) with existing loop clamp (33), nut (35), lockwasher (34),

washer (32), and screw (31).

37-11.

Attach antenna cable (14) to antenna base (40).

37-12.

Coil excess antenna cable (14) and secure to inside of taillight closeout cover with tiedown strap (36).