TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 67 of 168
TB 9-2320-280-35-15
5-43
Section XXIII. ANTENNA INSTALLATION
NOTE
This procedure applies to vehicles without existing antennas, and
to either left or right side of vehicle.
23-1.
Using antenna bracket (3) as template, locate, mark, and drill 1.375-in. diameter hole (2) in rear
wall (4).
23-2.
Locate, mark, and drill three 0.343-in. diameter holes (1) in rear wall (4).
23-3.
Remove paint from vicinity of three holes (1) and three holes in antenna bracket (3).
23-4.
Apply anti-seize compound to vicinity of three holes (1) and rear of antenna bracket (3).
Figure 5-52.
3. ANTENNA MOUNTING BRACKET – A3014546-1 – QTY. 1
3
2
1
4
1
2.00
1.25
Back to Top
