TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 73 of 168
TB 9-2320-280-35-15
5-49
Section XXV. SINCGARS PEDESTAL ANTENNA MOUNT INSTALLATION
25-1.
Assemble antenna mounting bracket (3) and antenna base reinforcement bracket (4) with eight
capscrews (1), sixteen lockwashers (2), and eight nuts (5). Do not tighten nuts (5) at this time.
NOTE
Remove paint or tape from mounting holes.
25-2.
Remove paint from vicinity of all mounting holes on both antenna plates, antenna mount assembly,
and ground strap. Apply anti-seize compound as required.
1. CAPSCREW – B1821BH025C100N – QTY. 8
2. LOCKWASHER – MS35338-44 – QTY. 16
3. ANTENNA MOUNTING BRACKET – A3018371-2 – QTY. 1
4. ANTENNA BASE REINFORCEMENT BRACKET – A3018372-2 – QTY. 1
5. NUT – MS51967-2 – QTY. 8
4
1
5
3
2
2
Figure 5-58.
~
Back to Top
