TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 80 of 168
TB 9-2320-280-35-15
5-56
14. CAPSCREW – B1821BH044C125N – QTY. 2
15. WASHER – 2436163 – QTY. 6
17. CAPSCREW – B1821BH025C150N – QTY. 2
18. WASHER – 2436161 – QTY. 26
19. CAPSCREW – B1821BH025C100N – QTY. 11
20. LOCKWASHER – MS35338-44 – QTY. 13
21. NUT – 9419143 – QTY. 13
22. ANTENNA PLATE – A3157619 – QTY. 1
23. LOCKWASHER – 120382 – QTY. 3
24. NUT – 13218E0320-293 – QTY. 3
25. CAPSCREW – B1821BH044C150N – QTY. 1
NOTE
Enlarge hole on antenna mount assembly to accommodate 7/16-in.
bolts.
26-6.
Install antenna mount assembly (16), upper antenna plate (6), and lower antenna plate (22) on left
rear wheelhouse (13) with eleven capscrews (19), twenty-two washers (18), eleven lockwashers (20),
and nuts (21).
26-7.
Secure antenna mount assembly (16), upper antenna plate (6), and lower antenna plate (22) to
left rear wheelhouse (13) with two capscrews (14), four washers (15), two lockwashers (23), and
nuts (24).
26-8.
Secure antenna mount assembly (16), upper antenna plate (6), and lower antenna plate (22) to
left rear wheelhouse (13) with two capscrews (17), four washers (18), two lockwashers (20), and
nuts (21).
26-9.
Secure antenna mount assembly (16), upper antenna plate (6), and lower antenna plate (22) to
left rear wheelhouse (13) with capscrew (25), two washers (15), lockwasher (23), and nut (24).
Figure 5-65.
15
15
14
16
17
19
18
18
18
20
21
18
15
6
15
25
14
20
21
22
15
23
23
24
24
13
~
Back to Top
