TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 89 of 168
5-65
TB 9-2320-280-35-15
30-2.
Remove windshield wiper from right-side windshield frame. (Refer to TM 9-2320-280-20-3.)
30-3.
Position cutout of QEAM rack (4) centered on windshield wiper pivot (8).
30-4.
Using QEAM rack (4) as template, locate, mark, and drill four 0.250-in. diameter holes in
right-side windshield frame (6). Remove QEAM rack (4).
30-5.
Enlarge four holes drilled in step 30-4 to 0.391-in. diameter.
30-6.
Install four inserts (11) in windshield frame (6).
30-7.
Install QEAM rack (4) on windshield frame (6) with four capscrews (7), washers (9), lockwashers
(10), and inserts (11).
30-8.
Install windshield wiper. (Refer to TM 9-2320-280-20-3.)
Figure 5-76.
6
11
4
7
8
9
10
~
7. CAPSCREW – B1821BH025C150N – QTY. 4
9. WASHER – MS27183-10 – QTY. 4
10. LOCKWASHER – MS35338-44 – QTY. 4
11. INSERT – 12446871-2 – QTY. 4
Back to Top
