TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 87 of 168
5-63
TB 9-2320-280-35-15
Figure 5-73.
1
2
3
4
9
15
5
11
29-11.
Using mounting plate (4) as template, center on left side of windshield frame (9) between access
hole (15) and footman loop (11). Mark and drill four 0.390-in. holes (14) in windshield frame (9).
29-12.
Install four inserts (5) in windshield frame (9).
29-13.
Install mounting plate (4) with four capscrews (1), lockwashers (2), and washers (3).
~
14
Figure 5-74.
1. CAPSCREW – B1821BH025C075N – QTY. 4
2. LOCKWASHER –MS35338-44 – QTY. 4
3. WASHER – 2436161 – QTY. 4
4. MOUNTING PLATE – A3014550-1 – QTY. 1
5. INSERT – 12446871-2 – QTY. 4
13. LOUDSPEAKER –A3014065-1 –QTY. 2
12
13
4
29-14.
Attach loudspeaker (13) to mounting plate (4) with two externally-relieved body screws (12). Repeat
for opposite side.
Back to Top
