TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 83 of 168
5-59
TB 9-2320-280-35-15
1. SELF-TAPPING SCREW – 9426634 – QTY. 4
6. SPACER – 92510A318 – QTY. 4
7. URO (USER READOUT) BRACKET – A3006206 – QTY. 1
Figure 5-68.
~
~
~
4
6
7
5
2
3
1
Section XXVIII. EPLRS URO (USER READOUT) INSTALLATION
NOTE
• Cables have been removed for clarity.
• Ensure all mounting holes are on the flat surface of cargo floor
raised ribs.
• SINCGARS model AN/VRC-92F shown.
28-1.
Locate, mark, and drill four 0.147-in. holes (5) on tunnel (4) in between integrated rack (2) and
lower shelf of multi-net rack (3).
28-2.
Install URO bracket (7) on tunnel (4) with four self-tapping screws (1) and spacers (6).
Back to Top
