TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 86 of 168
5-62
TB 9-2320-280-35-15
Figure 5-72.
1. CAPSCREW – B1821BH025C075N – QTY. 4
2. LOCKWASHER –MS35338-44 – QTY. 4
3. WASHER – 2436161 – QTY. 4
4. MOUNTING PLATE – A3014550-1 – QTY. 1
5. INSERT – 12446871-2 – QTY. 4
NOTE
Perform steps 29-8 through 29-14 for vehicles with horizontal
wiper motor only.
29-8.
Using mounting plate (4) as template, center on right side of windshield frame (9) between wiper
motor mounting plate (8) and footman loop (6). Mark and drill four 0.390-in. diameter holes (7) in
windshield frame (9).
29-9.
Install four inserts (5) in windshield frame (9).
29-10.
Install mounting plate (4) with four capscrews (1), lockwashers (2), and washers (3).
1
2
3
4
5
8
~
9
~
7
6
Back to Top
