TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 97 of 168
5-73
TB 9-2320-280-35-15
33-3.
Pull DAGR antenna cable (6) through hole (17) in left-side outer windshield frame (2). Split one
side of grommet (16). Place grommet (16) on cable (6) and insert grommet (16) in hole (17) in
left-side outer windshield frame (2).
33-4.
Using DAGR antenna mount (7) as a template, locate, mark, and drill two 0.391-in. diameter
holes (18) in QEAM rack (12).
33-5.
Install DAGR antenna (5) to DAGR mount (7) with capscrew (23) and washer (24).
33-6.
Install DAGR mount to QEAM rack with two capscrews (11), washers (10), spacers (13),
lockwashers (19), and nuts (20).
33-7.
Route antenna cable (6) up through DAGR antenna mount (7).
33-8.
Attach DAGR antenna cable (6) to DAGR antenna (5).
33-9.
Secure DAGR antenna cable (6) to DAGR mount (7) with loop clamp (9), capscrew (21), washer (22),
and nut (8).
33-10.
Secure DAGR antenna cable (6) to QEAM rack (12) with loop clamp (14) and self-tapping screw (15).
Figure 5-87.
5. DAGR ANTENNA – N/A – QTY. 1
6. DAGR ANTENNA CABLE – 426-0141-050 – QTY. 1
8. NUT – TO COME – QTY. 1
9. LOOP CLAMP – TO COME – QTY. 1
10. WASHER – MS2436161 – QTY. 2
11. CAPSCREW – B1821BH025C100N – QTY. 2
13. SPACER – N/A – QTY. 1
14. LOOP CLAMP – MS21333-98 – QTY. 1
15. SELF-TAPPING SCREW – 9421073 – QTY. 1
16. GROMMET – MS35489-143 – QTY. 1
19. LOCKWASHER – MS35338-48 – QTY. 2
20. NUT – 9419143 – QTY. 2
21. CAPSCREW – TO COME – QTY. 1
22. WASHER – TO COME – QTY. 1
23. SCREW – 160035 – QTY. 1
24. WASHER – 9417373 – QTY. 1
~
~
5
6
7
8
9
10
11
12
13
14
15
18
19
20
16
17
2
23
24
21
22
8.50
Back to Top
