TB-9-2320-280-35-15

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11

SEPTEMBER 2006

TB-9-2320-280-35-15 - Page 102 of 168

5-78

TB 9-2320-280-35-15

Section XXXIV. ARMOR AND ANTENNA INSTALLATION (WITH BOLT-ON ARMOR)

NOTE

• DAGR shown, PLGR similar.

• Perform following steps for vehicles with bolt-on armor and

antenna mounted on right side of windshield frame.

• It may be necessary to drill pilot hole prior to drilling 0.562-in.

diameter hole.

34-1.

Locate, mark, and drill one 0.562-in. diameter hole (1) on right side of A-pillar (2).

Figure 5-92.

0.50

1.53

~

2

1