TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 103 of 168
5-79
TB 9-2320-280-35-15
9. WASHER – MS2436161 – QTY. 2
10. CAPSCREW – B1821BH025C100N – QTY. 2
12. SPACER – N/A – QTY. 2
13. LOOP CLAMP – MS21333-98 – QTY. 1
14. SELF-TAPPING SCREW – 9421073 – QTY. 1
17. LOCKWASHER – MS35338-48 – QTY. 2
18. NUT – 9419143 – QTY. 2
20. SCREW – 160035 – QTY. 1
21. WASHER – 9417373 – QTY. 1
34-2.
Using DAGR antenna mount (5) as a template, locate, mark, and drill two 0.281-in. diameter
holes (16) in QEAM rack (11).
34-3.
Install DAGR antenna (3) to DAGR mount (5) with capscrew (20) and washer (21).
34-4.
Install DAGR mount (5) to QEAM rack (11) with two capscrews (10), washers (9), spacers (12),
lockwashers (17), and nuts (18).
34-5.
Attach DAGR antenna cable (4) to DAGR antenna (3).
34-6.
Route antenna cable (4) down through DAGR antenna mount (5) and along windshield frame (15).
34-7.
Secure DAGR antenna cable (4) to DAGR mount (5) with loop clamp (19), capscrew (8), washer (7)
and nut (6).
34-8.
Secure DAGR antenna cable (4) to QEAM rack (11) with loop clamp (13) and self-tapping screw (14).
Figure 5-93.
3
4
5
6
7
8
9
10
11
~
14
13
12
17
18
15
~
19
20
21
16
8.50
Back to Top
