TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 72 of 168
TB 9-2320-280-35-15
5-48
Figure 5-57.
9. CAPSCREW – B1821BH025C125N – QTY. 4
10. LOCKWASHER – MS45904-72 – QTY. 16
11. CAPSCREW – B1821BH031C100N – QTY. 8
12. RESILIENT MOUNT – MT-6146/VSQ-1 – QTY. 1
13. NUT – 9417954 – QTY. 8
15. SPACER – A3046313 – QTY. 4
16. NUT – 9419143 – QTY. 4
17. LOCKWASHER – MS35338-44 – QTY. 4
18. WASHER – 2436161 – QTY. 8
~
4
13
10
16
17
18
19
6
~
10
13
10
11
14
14
24-6.
Install resilient mount (12) on mounting plate (6) with four capscrews (11), eight lockwashers (10),
and four nuts (13).
24-7.
Remove paint from vicinity of eight mounting holes (19) and (14) on left rear wheelhouse (4). Apply
anti-seize compound as required. Position mounting plate (6) on left rear wheelhouse (4) and align
all holes.
24-8.
Install mounting plate (6) on left rear wheelhouse (4) with four capscrews (9), washers (18),
lockwashers (17), and nuts (16).
24-9.
Secure mounting plate (6) to left rear wheelhouse (4) with four capscrews (11), lockwashers (10),
spacers (15), lockwashers (10) and nuts (13).
24-10.
Remove two capscrews (1), four washers (2), and two nuts (5) from positioning plate (3) and left rear
wheelhouse (4).
15
18
9
10
11
12
1
2
3
4
2
5
~
Back to Top
