TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 68 of 168
TB 9-2320-280-35-15
5-44
23-5.
Install grommet (12) in hole (2) of rear wall (4).
23-6.
Position antenna (13) and gasket (7) on antenna bracket (3) and route existing ground strap (9)
through antenna bracket (3).
23-7.
Install antenna (13) on antenna bracket (3) with four capscrews (5), eight lockwashers (6), and four
nuts (8).
23-8.
Install antenna bracket (3) on rear wall (4) with two capscrews (10), lockwashers (6), washers (14),
and nuts (15).
23-9.
Remove old terminal lug, and install new terminal lug (11) on ground strap (9). Install ground
strap (9) and antenna bracket (3) on rear wall (4) with capscrew (10), lockwasher (6), washer (14),
and nut (15).
Figure 5-53.
15
4
13
12
6
11
3
10
11
9
5
6
7
6
8
9
14
5. CAPSCREW – MS35307-365 – QTY. 4
6. LOCKWASHER – MS45904-72 – QTY. 11
7. GASKET – A3013655-1 – QTY. 1
8. NUT – 13218E0320-293 – QTY. 4
10. CAPSCREW – B1821BH031F125N – QTY. 3
11. TERMINAL LUG – MS20659-108 – QTY. 1
12. GROMMET – 12338098 – QTY. 1
13. ANTENNA – A3017899-2 – QTY. 1
14. WASHER – 12338095 – QTY. 3
15. NUT – 9418892 – QTY. 3
2
Back to Top
