TB-9-2320-387-35-4
SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
TECHNICAL BULLETIN; INSTALLATION INSTRUCTIONS
OCTOBER 2006
TB-9-2320-387-35-4 - Page 66 of 109
5-50
TB 9-2320-387-35-4
NOTE
Ensure convoluted tubing is cut straight and even to allow proper
fit of locking collar.
19-8.
Install locking collar (15) on one end of convoluted tubing (16).
19-9.
Place convoluted tubing and grommet assembly (16) in hole (17) of right wheelhouse (3), through
wheelhouse (3), and through hole (11) in right wheelhouse (3). Mark convoluted tubing (16) at
proper length.
19-10.
Remove convoluted tubing (16) from wheelhouse (3) and cut to proper length.
NOTE
Ensure convoluted tubing is cut straight and even to allow proper
fit of locking collar.
19-11.
Install locking collar (15) on other end of convoluted tubing (16).
19-12.
Place convoluted tubing and grommet assembly (16) in hole (11) on inside of right wheelhouse (3),
through wheelhouse (3), and through hole (17) in rear wall (3). Secure convoluted tubing (16) to
rear wall (3) with nylon nuts (18).
16
17
3
~
Figure 5-64.
16
15
15. LOCKING COLLAR – Z52-0013-002 – QTY. 2
16. CONVOLUTED TUBING – Z52-0013-001 – QTY. 1
18
18. NYLON NUT – 10075-1397 – QTY. 1
18. NYLON NUT – 10075-1397 – QTY. 1
Figure 5-63.
16
3
11
18
~
Figure 5-62.
Back to Top
