TB-9-2350-277-40-P-1
CARRIER, MORTAR, 120-MM M121, SELF-PROPELLED M1064A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 1 OF 4
JUNE 2009
TB-9-2350-277-40-P-1 - Page 51 of 100
TB 9-2350-277-40&P-1
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-15
INSTALL ENCLOSURE ASSEMBLY
CAUTION
Ensure the CREW II cables and ground strap are not pinched during
enclosure installation.
Failure to comply could result in equipment
damage.
1.
Secure the CREW II cables (77) and ground strap (29) to the CREW II mount assembly (1) using
a tie strap (78).
Figure 14.
Secure CREW II Cables
Back to Top
