TB-9-2350-277-40-P-1
CARRIER, MORTAR, 120-MM M121, SELF-PROPELLED M1064A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 1 OF 4
JUNE 2009
TB-9-2350-277-40-P-1 - Page 50 of 100
TB 9-2350-277-40&P-1
INSTALLATION PROCEDURES – Continued
0005 00
0005 00-14
INSTALL ANTENNA STOWAGE BRACKET
1.
Locate two holes (72) and (73) drilled in the center rear of the roof of carrier.
2.
Position antenna bracket (76), washer (71), and lockwasher (70) over center hole (72) in edge of
bracket and secure with handle (69) and antenna screw (68).
3.
Install screw (75) and lockwasher (74) in hole (73) next to antenna bracket to serve as a stop.
4.
Stow strap (67) to antenna bracket (76).
Figure 13.
Antenna Stowage Bracket Installation
Back to Top
