TB-9-2510-251-13
TECHNICAL BULLETIN
OPERATOR AND FIELD MAINTENANCE; INSTALLATION MANUAL (INCLUDING REPAIR PARTS LIST); FOR ADD-ON-ARMOR (AoA) AIR CONDITIONING
AUGUST 2007
TB-9-2510-251-13 - Page 54 of 624
2-38
TB 9-2510-251-13
(11)
Remove clamps (10).
Attach fuel line (11), fuel return line (12), and wire harness (13) to
engine.
Set hardware aside for future use.
12
13
10
11
(8)
Remove bolt (4), washer (5), bushing (6), lockwasher (7), and nut (8) from 5-inch idler
pulley (3).
Set aside.
(9)
Install new 3-inch grooved idler pulley (9) where center flat idler pulley was removed.
(10)
Secure with hardware from 5-inch pulley (3).
9
7
8
6
5
3
4
2-1.2
Installation of Air Conditioning Kit to M1097A2 with GSIE Add-on-Armor (Cont’d).
a. Install Compressor (Cont’d)
Figure 2-52.
5-Inch Idler Pulley
Figure 2-53.
3-Inch Idler Pulley
Figure 2-54.
Compressor Installation
Back to Top
