TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 387 of 704

0038-3

Change 1

TB 9-3950-253-13&P

0038

REMOVAL – CONTINUED

NOTE

•

Note number of spacers removed to aid installation.

•

Note position of spring to aid in installation.

5. Remove bolt (Figure 2, Item 7), block (Figure 2, Item 10), and spacers (Figure 2, Item 9) from clamping device

(Figure 2, Item 2).

6. Remove two spring pins (Figure 2, Item 8) from block (Figure 2, Item 10).

7. Remove spring pin (Figure 2, Item 5) from plate (Figure 2, Item 4). Discard spring pin.

8. With assistance, while supporting clamping device (Figure 2, Item 2), remove shaft (Figure 2, Item 3), spring

(Figure 2, Item 6), plate (Figure 2, Item 4), and clamping device (Figure 2, Item 2) from slider housing

(Figure 2, Item 1).

Figure 2.

Clamping Device Removal.

038

END OF TASK

CLEANING AND INSPECTION

00038

Clean and inspect all parts IAW WP 0020,

General Maintenance Instructions

.

END OF TASK

1

2

3

4

5

6

7

8

10

9