TB-9-3950-253-13-P
PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)
TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2009
TB-9-3950-253-13-P - Page 388 of 704
TB 9-3950-253-13&P
Change 1
0038-4
0038
INSTALLATION
00038
NOTE
•
Install same number of spacers as removed.
•
Install spring as noted during removal.
1. With assistance, install clamping device (Figure 3, Item 2), plate (Figure 3, Item 4), spring (Figure 3, Item 6),
and shaft (Figure 3, Item 3) in slider housing (Figure 3, Item 1).
2. Install new spring pin (Figure 3, Item 5) in plate (Figure 3, Item 4).
3. Install two spring pins (Figure 3, Item 8) in block (Figure 3, Item 10).
4. Install spacers (Figure 3, Item 9), block (Figure 3, Item 10), and bolt (Figure 3, Item 7) in clamping device
(Figure 3, Item 2).
Figure 3.
Clamping Device Installation.
038
1
2
3
4
5
6
7
8
10
9
Back to Top
