TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 389 of 704

0038-5

Change 1

TB 9-3950-253-13&P

0038

INSTALLATION – CONTINUED

WARNING

Use caution and wear eye protection when installing clamping device. Clamping device is

spring loaded and may move erratically during installation. Failure to follow this warning

may result in injury to personnel or damage to equipment.

5. With assistance and while supporting clamping device handle (Figure 4, Item 2), apply pressure to plate (Fig-

ure 4, Item 3) to position holes as marked during removal, and place punch in one hole to prevent shaft move-

ment.

6. Install three washers (Figure 4, Item 5) and bolts (Figure 4, Item 6) in shaft (Figure 4, Item 4).

7. Install new tiedown straps (Figure 4, Item 1) as required.

Figure 4.

Clamping Device Installation.

038

END OF TASK

1

2

4

5,6

2

3