TB-9-3950-253-13-P

PALLETIZED LOAD SYSTEM TRUCK, M1075 and M1075A1 (PLS) AND HEAVY EXPANDED MOBILITY TACTICAL TRUCK, M1120, M1120A2, AND M1120A4 (HEMTT), ENHANCED CONTAINER HANDLING UNIT (E-CHU)

TECHNICAL BULLETIN; OPERATOR AND FIELD MAINTENANCE, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2009

TB-9-3950-253-13-P - Page 401 of 704

0040-3/(4 Blank)

0040

TB 9-3950-253-13&P

INSTALLATION

00040

NOTE

•

Perform steps 1 through 5 for both right and left sides.

•

Install spacers as noted during removal.

1. Apply grease to roller pin (Figure 1, Item 4).

2. With assistance, install twistlock housing (Figure 1, Item 8) and locking pin (Figure 1, Item 9) on rear slider bed

(Figure 1, Item 1).

3. With assistance, install twistlock assembly (Figure 1, Item 7) in rear slider bed (Figure 1, Item 1), aligning holes

in twistlock housing (Figure 1, Item 8), twistlock assembly, and rear roller bed, install two spacers (Figure 1,

Item 5), roller pin (Figure 1, Item 4), washer (Figure 1, Item 3), and bolt (Figure 1, Item 3) in rear slider bed.

4. Install locking pin (Figure 1, Item 5) on rear slider bed (Figure 1, Item 1).

5. Install clip (Figure 1, Item 11) in locking pin (Figure 1, Item 9).

END OF TASK

END OF WORK PACKAGE