TB 9-3950-253-13&P
0041-2
0041
REMOVAL – CONTINUED
NOTE
Perform steps 2 and 3 or both right and left sides.
2. Remove bolt (Figure 2, Item 5), star washer (Figure 2, Item 4), and washer (Figure 2, Item 3) from rear beam
(Figure 2, Item 1). Discard star washer.
3. Remove roller pin (Figure 2, Item 2), two thrust washers (Figure 2, Item 6), and flatrack roller (Figure 2, Item 7)
from rear beam (Figure 2, Item 1).
Figure 2.
Flatrack Roller.
041
END OF TASK
CLEANING AND INSPECTION
00041
Clean and inspect all parts IAW WP 0020, General Maintenance Instructions.
END OF TASK
467-012
1
2
3
5
6
6
7
4