TM-10-5411-205-13
SHELTER, ELECTRICAL EQUIPMENT - 250/G
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL
MAY 1995
CHANGE 2
TM-10-5411-205-13 - Page 61 of 127
TM 10-5411-205-13
3-21.
Hinge Assembly (cont).
e
.
Install.
(1) Apply a coat of conductive compound on mounting side of laminated shim (5)
and position shim (5) and hinge assembly (4) in place over mounting holes.
(2) Using three hex head screws (3) and flat washers (2) from the outside of door
panel, secure with three flat washers (2) and nuts (1) from inside of panel.
(3) Apply a continuous bead of sealer around edge of hinge leaf (8) and laminated
shim (5) and around head of hex head screws (3).
Figure 3-23. Hinge Assembly Replacement.
3-44
Back to Top
