TM 5-2350-377-14&P
TRACK AND BLADE MANIFOLD ASSEMBLY REPLACEMENT - continued
NOTE
Steps 10, 11, 1, and 2 apply to Figure 79.
10. Remove two flat washers (item 14), screws (item 13), and tie downs (item 12) from track and blade manifold assembly
(item 1).
Figure 79.
Rear Fuel Tank Strap.
11. Remove six screws (item 13), rear manifold mount (item 9), and front manifold mount (item 8) from track and blade
manifold assembly (item 1)
ASSEMBLY
1. Install two tie downs (item 12), flat washers (item 14), and screws (item 13) to track and blade manifold assembly
(item 1).
Torque to 45.0 to 50.0 lb-ft (200.1 to 222.4 N•m).
2. Install rear manifold mount (item 9), front manifold mount (item 8), and six screws (item 13) to track and blade manifold
assembly (item1).
0029 00
0029 00-3