TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 179 of 335
TM 5-2350-377-14&P
TRACK ADJUSTING CYLINDER ASSEMBLY REPLACEMENT - continued
NOTE
There is an additional clamp on left hydraulic track adjusting cylinder.
Step 2 applies to Figure69.
2. Remove screw ( item 9), washers (item 7), and locknut (item 6), and pin ( item 8) and disconnect rod end ( item 5)
of hydraulic track adjusting cylinder (item 4) from final drive adjusting flange (item 10).
Figure 69.
Rear Fuel Tank Strap.
NOTE
Screw must be removed from bottom when connecting fixed end of cylinder to hull.
Step 3 applies to Figure 70.
3. Remove screw (item 12), washers (item 7), locknut (item 6), and pin (item 8), and fixed end of track adjusting cylinder
(item 4) from hull mounting bracket (item 11).
Figure 70.
Track Adjusting Cylinder Rod End.
0028 00-2
0028 00
7
8
6
11
4
7
12
7
9
10
7
8
5
4
6
Back to Top
