TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 176 of 790

TM 5--2350--378--24&P

0011 00--5

EJECTOR CREEPS -- Continued

0011 00

Figure 3. Ejector Control Valve Linkage

EJECTOR CONTROL VALVE LEAKAGE TEST

Stop engine; relieve hydraulic pressure.

Hold a measuring device (Figure 3, item 1) on the face of ejector control valve (Figure 3,

item 3) on the DCV bank. Have assistant move EJECTOR CONTROL lever between

FORWARD and BACK. Measure distance plunger (Figure 3, item 2) travels as lever is

moved. The distance of travel should be 9/32 in. (7 mm).