TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 753 of 894

TRUCK SERVICE MANUAL

TRANSMISSION

INSPECTION AND REBUILD

Para 6-9/6-10

b.

Assembly (B, foldout 7)

(1)

If bearing 25 was removed, install a new

bearing, ungrooved end first, into pump hub 27.

Install

gasket 26.

(2)

Install a 3/8-24 headless guide bolt into

converter pump hub 27 or gear 32.

Install sealring 20

onto the outside diameter of converter pump assembly

21.

(3)

Install converter pump hub 27 onto the

converter pump.

Remove the guide bolt.

Install two

bearing retainers 19 and retain them with twelve

3/8-24

x 1 1/4-inch bolts (pump hub 27) and six new lockstrips.

Tighten the bolts to 33 to 40 pound feet (45 to 54 Nm)

torque.

Bend one lockstrip corner against each bolt

head (fig. 6-12).

6-10.

CONVERTER HOUSING WITH 2-BOLT TOP

COVER, FRONT SUPPORT, OIL PUMP.

a.

Disassembly

(1)

Place the converter housing front downward

(fig. 6-13).

Remove two sealrings, needle bearing and

race from the front support hub.