TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 752 of 894

TRUCK SERVICE MANUAL

TRANSMISSION

Para 6-8/6-9

HT 700D SERIES TRANSMISSIONS

(2)

Coat the pockets of stator 9, stator springs 10

and rollers 11 with oil-soluble grease.

(3)

Install stator roller holder 17 (fig. 4-2) into the

stator against the thrust bearing race installed in (1),

above (fig. 6-9).

(4)

Install ten freewheel roller springs into the

stator cam pockets.

The springs must be positioned as

shown in figure 6-10 (5) Install ten freewheel rollers (fig.

6-9).

(6)

Install the thrust bearing onto the freewheel

roller race (fig. 6-11).

(7)

Start the freewheel roller race the roller holder

(fig. 6-11).

Rotate the race clockwise to install it.

Fig. 6-10.

Spring and roller in stator cam.